GTranslate

Qui est en ligne ?

Nous avons 5 invités en ligne

Espace TIC

Service messagerie

Identification



SNDL

النظام الوطني للتوثيق الإلكتروني

Système National de Documentation en Ligne

Communications Internationales

D)Equipe04

01

S. E. Zouzou,  A. Kedous-Lebouc, B. Cornut  and  P. Brissonneau,  "Magnetic losses under rotational field", Conference of the research actions for the Ministry of Research and the Technology - Electrical Engineering, 5-6 November 1991, PP.173-182, Paris, France.

02

S. E. Zouzou, A. Kedous-Lebous, P. Brissonneau, "Magnetic properties under unidirectional and rotational field",  Tenth International Conference on Soft Magnetic Materials, SMM, 11-13 September 1991, Dresden, Germany.

03

A. Kedous-Lebouc, S. E. Zouzou and P. Brissonneau, "On the magnetizing processes in electrical steel in unidirectional and rotational field", First international workshop on magnetic properties of electrical sheet steel under two-dimentional excitation, physikalisch technische bundesanstalt , April 1992, pp.36-47,Germany

04

A. Kedous-Lebouc, S. E. Zouzou, P. Brissonneau, "Anisotropy influence on the rotational and alternating field behavior of soft magnetic materials", International Magnetics Conference INTERMAG 1992, 13-16 April 1992, St. Louis, MO, USA.

05

S. E. Zouzou, "Magnetic study of the field and induction distribution on the surface of a magnetic sheet of a rotating field tester", Second International conference on automatic, Electronics and Industrial Electronics, COMAEI 96, 3-5 December 1996, Tlemcen.

06

S. E. Zouzou, "Numerical Modeling of rotational power losses tester", International Conference on Electro technique, ICEL 1998, 5-7 October 1998, Oran.

07

S. E. Zouzou, "Numerical Modeling of rotational power losses tester", International Conference on Electro technique, ICEL 1998, 5-7 October 1998, Oran.

08

  1. A. Cheriet , S. M. Mimoune, K. Srairi, J. Fouladgar, “Nouvelle interpolation numérique dans la méthode des volumes finis appliquée  aux dispositifs électromagnétiques présentant une faible épaisseur de peau”, Proceding of the International Conference on Electrotechnics, ICEL’2000, pp. 604-606, Vol.2, 13-15 Nov. 2000, Oran Algeria.

09

S. M. Mimoune, F. M. Aref, A. Cheriet, A. Salhi, K. Srairi, J. Fouladgar
M. Feliachi, R. Baron, “Impedance calculation in 3D eddy current non destructive evaluation by control volume method using the A-V formulation with the driven current source model”, The Tenth Biennial IEEE Conference on Electromagnetic Field Computation CEFC’02, Proc., No. 248, Jun. 2002, Perugia Italy.

10

M. Sahraoui, S. E. Zouzou, A. Aboubou, "Diagnosis of rotor faults in three-phase induction motors by the extended Park's vector approach", First  International Conference on the Electrical Energy and its Applications , 24-25 May 2004, Sidi bel-Abbès.

11

M. Sahraoui, S. E. Zouzou, A. Aboubou, and A. Ghoggal,  "Comparative study of two Method dedicated to the detection of the broken bars in  induction motors ", First International Conference on Electrical Engineering, CEE 2004, 04-06 October 2004, Batna.

12

M. T. Benchouia, S. E.  Zouzou, A. Golea, "Modeling and simulation of variable speed system with fuzzy logic", First International Conference on Electrical Engineering, CEE’04, 04-06 October 2004Batna.

13

M. Sahraoui, A. Aboubou, A. Menacer, S. E. Zouzou,  and A. Derghal, "Method dedicated to the detection of the broken bars in three-phase squirrel-cage induction motors with instantaneous power", International Conference on Electrical and Electronics  Engineering, ICEEE 2004, 24-26 April 2004, Laghaout.

14

A. Bensalem, S. E. Zouzou, "Economic dispatch of the production of power", International Conference on Electrical and Electronics Engineering, Communication and Physical Systems, 04-05 May 2004, Saida..

15

A. Bensalem, S. E. Zouzou, A. Bouhentala  and  M. Laouer, "Optimal distribution of the production of power plants by the method of the increased lagrangien", First international Conference on Electrical Engineering, CIGE 2004, 03-05 october 2004, Bechar.

16

S. E. Zouzou, M. Sahraoui,  A. Aboubou, A. Menacer and A. Derghal, "Method dedicated to the detection of the broken bars in three phase squired cage induction motors", Third International conference on Electrical Engineering and Automatics, JTEA 2004, 21-23 May 2004, Hammamet, Tunisia.

17

A. Aboubou, H. Razik, M. SahraouiS. E. Zouzou, and  A. Rezzoug, "Broken bars and/or end rings detection in three-phase induction motors by the extended Park's vector approach", 9th IEEE International Power Electronics Congress, CIEP 2004, 17-22 October 2004, PP. 128-133, Celaya, Mexico.

18

M. T. Benchouia, S. E. Zouzou, A. Golea, "An Adaptive fuzzy logic DC output controller with minimization harmonics of side network", IEEE International Conference on Industrial Technology, ICIT 2004, 8-10 December 2004, Vol. 3, PP.1239-43, Hammamet, Tunisia

19

M. T. Benchouia, S. E. Zouzou, A. Golea, "Modeling and simulation of variable speed drive system with adaptive fuzzy controller application to PMSM", IEEE International Conference on Industrial Technology, ICIT 20048-10 December 2004, Vol. 2, PP.683-7 , Hammamet, Tunisia

20

M. T. Benchouia, S. E. Zouzou, A. Golea, "Modeling and simulation of variable speed system with different regulators ", International Conference on Electrical Machines and Systems, ICEMS 2004, 1-3 November 2004, Seoul, Korea.

21

M. T Benchouia, S. E. Zouzou, A. Golea, "AC/DC /AC PWM three phase utility to provide a  regulated DC output and to minimize line currents harmonics using fuzzy adaptative controller", International Conference on Electrical Machines and Systems, ICEMS 2004, 1-3 November 2004, Seoul, Korea.

22

M. T. Benchouia, A. Golea and S. E. Zouzou, "AC/DC/AC Converter three phase utility to provide a regulated DC output and to minimized line currents harmonics using fuzzy adaptive control",, The International Conference on Electrical Machines and Systems (ICEMS 2004), November 1-3, 2004, SEOUL, KOREA..

23

M. T. Benchouia, A. Goléa, S. E. Zouzou, "Ac/DC/AC PWM Converter Three Phase Utility to provide a Regulated DC Output and to Minimized Line Current Harmonics using Adaptive Fuzzy Controller", International Conference on Electrical Machines and systems (ICEMS 2004), Seoul, Korea, November 1-3, 2004.

24

M.T.Ben chouia    S. E. Zouzou A. Ghamri   A. Golea, "Modeling and simulation of variable speed drive system with adaptive fuzzy controller application to PMSM", Proceeding of the IEEE International Conference on Industrial Technology, IEEE ICIT 04,(Eds),Vol. 2, pp683-687, 08-10 December  2004.

25

M.T.Ben chouia S. E. Zouzou A. Golea A. Ghamri, "Adaptive Fuzzy Logic output controller with minimization harmonics of side network", Proceeding of the IEEE International Conference on Industrial Technology, IEEE ICIT 04,(Eds),Vol.3, pp1239-1243 08-10 Dec 2004

26

M.T. Benchouia, S. E. Zouzou, A. Golea and A.Ghamri, “Modeling and Simulation of Variable Speed Drive System with Different Regulators”, the International Conference on Electrical Machines 3and Systems (ICEMS 2004), November 1-3, 2004, SEOUL, KOREA.

27

M.T Benchouia, A. Golea, S.E Zouzou,  A. Ghamri, Modelling and simulation of variable speed drive system using fuzzy and sliding mode controllers", 21-24 Mars 2005 Sousse Tunisia

28

M.T. Benchouia, S. E. Zouzou, A. Golea and A.Ghamri, “Modelling and Simulation of Variable Speed Drive System using Fuzzy and sliding mode controllers”, Third International Conference on Systems, Signals and Devices, (IEEE SSD'05), March 21-24, 2005, Sousse, Tunisia, Vol.1, Tunisia.

29

M.T. Benchouia, A. Golea, A.Ghamri, S. E. Zouzou, “Control of the DC Output Voltage of the AC/DC Converter using Adaptive Fuzzy Controller”, First International Conference on Electrical Systems (IEEE PCSE’05), May 9-11, 2005, O. E. Bouaghi Univ., Algeria.

30

S. E. Zouzou, H. Razik, A. Aboubou, M. Sahraoui, A. Ghoggal, "Modelling of Induction Machines with Skewed Rotor Slots Dedicated to Rotor Faults", 5th IEEE Symposium on Diagnostics for Electric Machines Power Electronics and Drives, SDEMPED 2005, 7-9 September 2005, Vienna, Austria.

31

A. Ghoggal, S. E. Zouzou, A. Aboubou, M. Sahraoui, "A 2D model of induction machine dedicates to faults detection–Extension of the modified winding function", International Conference on Electrical Systems, ICES 2006, 09-11 May 2005Oum El Bouaghi,

32

A.Ghoggal, M. Sahraoui, A. Aboubou, S. E. Zouzou, H. Razik, "An improved model of the induction machine dedicated to faults detection extension of the modified winding function", IEEE International Conference on Industrial Technology, ICIT 2005, 14-17 December 2005, PP.191-196, Hong Kong, China.

33

A. Bensalem, A. Bouhentala, S. E. Zouzou, "Optimal ménagement of the production of the hydroelectric power plants ", Conseil International des Grands Réseaux Électriques (International board of the Big Electricity networks), CIGRE 21-23 November 2005, Caire, Egypte.

34

M. T. Benchouia, A. Golea, S. E. Zouzou, A. Ghamri, "Adaptive Fuzzy Control of Reversible Rectifier Feeding Induction Motor With Improved Power Factor", International Conference on Electrical Machines, ICEM 2006, 2-5 september 2006, Chania, Greece.

35

M.T.Ben chouia  A. Golea,  S.E.Zouzou, A. Ghamri, "Adaptive Fuzzy Control of Renersible Rectifier Feeding Induction Motor With Improved Power Factor "

36

Bensalem ,A. Miloudi, S. E. Zouzou, B. Mahdad, A. Bouhentala, "Daily optimal operation policy of hydroelectric power systems, " International Conference on Electrical Systems, ICES 2006, 8-10 May 2006, Oum el bouaghi

37

A. Ghoggal, A. Aboubou, M. Sahraoui, S. E. Zouzou, H. Razik, "Experimental and computed results concerning the diagnosis of broken rotor bars of the induction motors", International conference on the Electrical energy and its Applications, 22-23 May 2006, Sidi Bel-Abbes.

38

A. Ghoggal, S. E. Zouzou, A. Aboubou, M. Sahraoui, H. Razik, "Experimental and computed results about the air-gap eccentricity faults in 2-pole induction motors considering the star stator winding coupling",  Second International Conference on Electrical Engineering, 07-08 November 2006, Batna.

39

A. Bensalem, A. Miloudi, S. E. Zouzou, B. Mahdad, A. Bouhentala, "Deterministic hydropower management of large power system", Second International  Conference on Electrical Engineering, 7-8 November 2006, Batna

40

A. Ghoggal, S. E. Zouzou, A. Aboubou, M. Sahraoui, "A 2D model of induction machine dedicates to faults detection–Extension of the modified winding function", International Conference on Electrical Systems, ICES 2006, 09-11 May 2006Oum El Bouaghi,

41

A. Ghoggal S. E. Zouzou, "Note about inductances calculation of induction motor under radial and  axial- air gap eccentricity", International Conference on Electrical Machines, ICEM 2006, 2-5 September 2006, Chania, Greece

42

M. Sahraoui, A. Ghoggal, S. E. Zouzou, H. Razik, "Modelling and detection of inter-turn short circuits in stator windings of induction motor", 32nd Annual Conference on IEEE Industrial Electronics , IECON 2006, 6-10 November 2006, PP. 4981-4986, Paris, France.

43

A. Ghoggal, A. Aboubou, S. E. Zouzou,  H. Razik, "Considerations about the modeling and simulation of air-gap eccentricity in induction motors", 32nd Annual Conference on IEEE Industrial Electronics, IECON 2006, 6-10 November 2006, PP.4987-4992, Paris, France

44

M. T. Benchouia, A, Ghamri, A. Golea, M. E. H Benbouzid and S. E. Zouzou, "Fuzzy model reference adaptive control of power converter for unity power actor and harmonics minimization ", International Conference on Electrical Machines and Systems, ICEMS 2007, 8-11 October 2007, PP.1239-1243, Seoul, South Korea.

45

A. Cheriet, A. Zaoui, M. Feliachi, S. M. Mimoune, “Computational performance comparison between FVM and FEM for 3-D magnetostatic problems”, 5eme Conférence européenne sur les méthodes numériques en électromagnétisme NUMELEC’06, Proc., No. 47, Nov. 2006, Lille France.

46

A. Cheriet, S. M. Mimoune, M. Feliachi, “3-D nonlinear magnetostatic field computation with finite volume method by means of M-B iteration”, 5eme Conférence européenne sur les méthodes numériques en électromagnétisme NUMELEC’06, Proc., No. 25, Nov. 2006, Lille France.

47

M.T. Benchouia,  A.Ghamri, M.E.H. Benbouzid, A.Golea, S. E .Zouzou, "Fuzzy Model Reference Adaptive Control of power converter for unity power factor and harmonics minimization", Proceeding of the IEEE  International Conference  on Electrical Machines and Systems IEEE ICEMS 2007,Vol. , pp1239-1243, October 2007.

48

A.Ghamri, M.T.Benchouia, M.E.H.Benbouzid A.Golea, S. E. Zouzou, "Simulation and Control of AC/DC Converter and Induction Machine Speed Using Adaptive Fuzzy Controller", Proceeding of the IEEE  International Conference  on Electrical Machines and Systems IEEE ICEMS 2007 ,Eds, Vol., pp539-542, October 2007.

49

M. T. Benchouia, A. Ghamri, A. Golea, M. E. H. Benbouzid and S. E. Zouzou, "Simulation and Control of AC/DC Converter and Induction Machine Speed Using Adaptive Fuzzy Controller ", International Conference on Electrical Machines and Systems ", ICEMS 2007, 8-11 October 2007, PP. 539-542, Seoul, South Korea.

50

A. Cheriet, M. Feliachi, S. M. Mimoune, “3-D movement simulation technique in FVM method application to eddy current non-destructive testing”, The XIV International Symposium on Theorical Electrical Engineering ISTET’07, Jun. 2007, Szczecin Poland.

51

A. Bensalem, A. El-Maouhab, B. Mahdad, A. Bouhentala, S. E. Zouzou, "Optimal management of waters used for the production of the electrical energy", International Conference on the Electrical Energy and its Applications, 20-22 May  2008, Sidi Bel-abbes.

52

A. Ghoggal, M. Sahraoui, S. E. Zouzou,  A. Aboubou, "Analytical studies of broken rotor bars related harmonics in induction motors," International Conference on the Electrical Energy and its Applications, 20-22 May 2008, Sidi Bel-Abbes

53

B. Helifa, A. Zaoui, M. Feliachi, I. K. Lefkaier, F. Boubendir, A. Cheriet, “Simulation du CND par courants de Foucault en vue de la caractérisation des fissures débouchantes dans les aciers austénitiques”, 6eme Conférence européenne sur les méthodes numériques en électromagnétisme NUMELEC’08, Proc., No. 48, Dec. 2008, Liège, Belgique.

54

S. E. Zouzou, W. Laala, S. Geudidi, M. Sahraoui,  "A fuzzy logic approach for the diagnosis of rotor faults in squirrel cage Induction Motors", International Conference on Computer and Electrical Engineering , ICCEE 2009, 28-30 December 2009, PP.173-178, Dubai, UAE.

A. Cheriet, M. Feliachi, S. M. Mimoune, M. Hamimid, “Steady-state analysis of an electromagnetic levitation device by a new 3D unstructured finite volume method”, The XV International Symposium

on Theorical Electrical Engineering, ISTET’09, Jun. 2009, Lubeck Germany. www.istet09.de.

55

A. Ghoggal, A. Hadri-Hamida, S. E. Zouzou, "Modélisation de la saturation magnétique dans les machines asynchrones tenant compte des harmoniques d’espace et du modèle multi-enroulement", CEE 2010, Université de Batna, Octobre 2010.

56

M. Sahraoui, S. E. Zouzou, A. Ghoggal, and S. Guedidi , "A New Method to Detect Inter-Turn Short-Circuit in Induction Motors", International Conference on Electrical Machines,  ICEM 2010, 6-8 september 2010, Rome, Italy.

57

S. E. Zouzou, M. Sahraoui, A. Ghoggal, and S. Guedidi, " Detection of Inter-Turn Short-Circuit and broken Rotor Bars in Induction Motors Using the Partial Relative Indexes: Application on the MCSA ", International Conference on Electrical Machines,  ICEM 2010, 6-8 september 2010, Rome, Italy.

58

Ghoggal, S. E. Zouzou, H. Razik, A. Hadri-Hamida, M. Sahraoui, "Application of the Convolution Theorem for the Modeling of Saturated Induction Motors", 36nd Annual Conference on IEEE Industrial Electronics, IECON 2010, 7-10 November 2010Glendale, AZ, USA.

59

A. Lakhdari, A. Cheriet, M. Feliachi, "Modélisation d’un capteur différentiel de CND-CF par la méthode des volumes finis", CEE’10, 6th International Conference on Electrical Engineering, pp. 492-495, Oct. 2010, Batna, Algeria.

60

K. Yahia, S. E. Zouzou, A. R. Guattaf, F. Benchabane, D.Taibi, "Comparative Study of an Adaptive Luenberger Observer and Extended Kalman Filter Based a Sensorless DirectVector Control

of Induction Motor", 6 th International Conference on Electrical Systems and Automatic Control , JTEA 2010 26-28 March 2010,   Hammamet, Tunisia.

61

M.T.Benchouia  A. Golea  S.E. Zouzou A. Ghamri, "Adaptive Fuzzy Control of Renersible Rectifier Feeding Induction Motor With Improved Power Factor "

62

Chennai salim, Benchouia M-T, Goléa.A, Zouzou S.E “Application des réseaux de neurones dans la commande d’un filtre actif parallèle en utilisant Matlab-Simulink”,  6th International Conference on Electrical Engineering’2010, CEE’2010, Université de Batna, Algeria, 11- 13 October 2010.

63

Chennai salim, Benchouia M-T, Goléa.A, Zouzou S.E “Utilisation des réseaux de neurones dans l’implémentation de la technique de commande SVPWM sous Matlab-Simulink”,  6th International Conference on Electrical Engineering’2010, CEE’2010, Université de Batna, Algeria, 11- 13 October 2010.

64

W. Laala, S. Guedidi, S. E. Zouzou, "Novel approach for diagnosis and detection of broken bar in induction motor at low slip using fuzzy logic",11th IEEE Symposium on Diagnostics for Electric Machines Power Electronics and Drives, SDEMPED 2011, 5-7 September 2011, Bologna, Italy

65

S. E. Zouzou,  S. Khelif, N. Halem, and M. Sahraoui, ”Analysis of induction motor with broken rotor bars using finite element method”,  2nd International Conference On Electric Power and Energy Conversion Systems (EPECS), Sharjah , UAE, 15-17 Nov 2011.

66

S. Guedidi, S. E.  Zouzou, W. Laala, M. Sahraoui and K. Yahia, "Broken bar fault diagnosis of induction motors using MCSA and neural network",11th IEEE Symposium on Diagnostics for Electric Machines Power Electronics and Drives, SDEMPED 2011, 5-7 September 2011, Bologna, Italy

67

  1. Lakhdari, A. Cheriet, M. Feliachi, Y. Li, " Estimation of a Hidden Crack Position Using the FVM Skin Effect Analysis", ISEM’11, Sep. 2011, Napoli, Italy. www.isem2011.unina.it.

68

A. Cheriet, M. Feliachi, A. Lakhdari, “Dynamic Characteristic Analysis of Eddy Current-Driven Electromechanical Device Using FVM Method”, Electrimacs 2011, 6-8th Jun. 2011, Université de Cergy-Pontoise, France. www.u-cergy.fr/electrimacs 2011.

69

Ghoggal, S. E.  Zouzou, M. Sahraoui,H. Derghal,A. Hadri-Hamida, "A winding function-based model of air-gap eccentricity in saturated induction motors" , International Conference on Electrical Machines, ICEM 2012, 2-5 September 2012,Marseille France.

70

M. Sahraoui, S. E.  Zouzou, A.  Ghoggal, S. Guedidi, H.  Derghal, "An improved algorithm for detection of rotor faults in squirrel cage induction motors basedon a new fault indicator", International Conference on Electrical Machines,  ICEM 2012, 2-5 September 2012, Marseille France.

71

A. E. Mabrouk, A. Cheriet, M. Feliachi, A. Lakhdari, "Transient Axisymmetric FVM Analysis of Electodynamic Levitation Devices", NUMELEC’12, Jul. 2012, Marseille, France. www.aimontefiore.org/numelec2012.