Qui est en ligne ?

We have 85 guests and no members online

Espace TIC

Service messagerie

SNDL

النظام الوطني للتوثيق الإلكتروني

Système National de Documentation en Ligne

Productions scientifiques

Publications nationales

01

Arrif, T., Benchabane, A., Chehhat, A., Belaid, A., & Rouag, A. (2018). Numerical simulation of convective heat losses in a helical tube of a cylindrical solar receiver. Journal of Applied Engineering Science & Technology, 4(2), 177-177.

02

Djebiret, M. A., Abbad, B., Benchabane, A., Ouali, M., Yahi, F., Berdja, M., & Rouag, A. (2018). Experimental study of solar adsorption refrigeration device. Journal of Applied Engineering Science & Technology, 4(2), 135-142.

03

Benfatah, H., Benchabane, A., Rouag, A., & Labed, A. (2018). Feasibility of solar adsorption air-conditioning in the region of Biskra: Reflection on the government support for electricity bills. Journal of Applied Engineering Science & Technology, 4(1), 77-82.

04

D.MIROUD, M. ZIDANI, S. AKLOUCHE et M. TATA. Effet de la formation d'agglomératsde W/Ni au cours du chauffage sur la densification du composite W-15Ni infiltré par le bronze industriel Cu-9Ni-6Sn. Revue science des matériaux, Laboratoire LARHYSS (N°08), Vol.7, n:2,p. 01-07 (2016).

05

Meghezzi-Larafi, I., & Tati, A. (2016). The effective length estimation of columns in semi-rigid jointed braced frames. Journal of Applied Engineering Science & Technology, 2(2), 91-97.

06

M.MEFTAH, M. ZIDANI, M.T.BOUZIANE et M. TATA. La protection active des anciensréseaux des distributions de gaz naturel. Revue science des matériaux, Laboratoire LARHYSS (N°08), Vol.7, n: 2, p.42-47 (2016).

07

M. Zidani, T. Djimaoui, M.D. Hadid. Effet du traitement thermique sur différents propriétés de l’alliage d’aluminium AGS tréfilé industriellement. Revue science des matériaux, Laboratoire LARHYSS (N°08) Vol.7, n:2, p.35-41 (2016).

08

A Labed, N Moummi, A Benchabane, K Aoues, M Zellouf (2015), Performances thermiques et pertes de charges de différentes configurations de capteurs solaires plans à air Etude expérimentale dans la région de Biskra, Algérie, Revue des Energies Renouvelables 18 (2), 209-216.

09

A Labed, N Moummi, M Zellouf, K Aoues, A Rouag (2015), Effect of Different Parameters on the Solar Drying of Henna; Experimental Investigation in the Region of Biskra (Algeria), In Progress in Clean Energy, Volume 2,  I. Dincer, C. O. Colpan, O. Kizilkan, M. A. Ezan (Eds.), Springer, 979-992.

10

M.D. HADID, M. ZIDANI, S. MESSAOUDI, L. BESSAIS, F. BAIRA, M.H. MATHON et T. BAUDIN, Caractérisation de la (microstructure/texture) et étude de comportementmécanique et électrique d'un fil d'aluminium tréfilé destiné au câblage électrique, Proceeding de 2nd International Syposium on Materials and Sustainable Development (2CIMDD'15), Boumerdes, 9-10 Novembre, pp.124-127 (2015).

 

 

Publications internationales

2018

01

Rouag, A., Benchabane, A., & Mehdid, C. E. (2018). Thermal design of Earth-to-Air Heat Exchanger. Part I a new transient semi-analytical model for determining soil temperature. Journal of Cleaner Production, 182, 538-544.

02

Mehdid, C. E., Benchabane, A., Rouag, A., Moummi, N., Melhegueg, M. A., Moummi, A., ... & Brima, A. (2018). Thermal design of Earth-to-air heat exchanger. Part II a new transient semi-analytical model and experimental validation for estimating air temperature. Journal of Cleaner Production, 198, 1536-1544.

03

Cherrad, N., & Benchabane, A. (2018). Interactive process to control the evaporating temperature of refrigerant for solar adsorption cooling machine with new correlation. International Journal on Interactive Design and Manufacturing (IJIDeM), 12(2), 473-479.

04

Arrif, T., Benchabane, A., Guermoui, M., Gama, A., & Merarda, H. (2018). Optical performance study of different shapes of solar cavity receivers used in central receiver system plant. International Journal of Ambient Energy, 1-15.

05

Karoua, H., Moummi, A., Hamidat, A., Moummi, N., Aoues, K., Benchabane, A., & Benchatti, A. (2018). International Journal of Heat and Technology. Journal homepage: http://iieta. org/Journals/IJHT, 36(3), 791-800.

06

Masri, T., Ounis, H., Sedira, L., Kaci, A., & Benchabane, A. (2018). Characterization of new composite material based on date palm leaflets and expanded polystyrene wastes. Construction and Building Materials, 164, 410-418.

07

Arrif, T., Benchabane, A., Gama, A., Merarda, H., & Belaid, A. (2018). Optical Simulation of Different Cavity Receivers Shape Used in Solar Tower Power Plant. In Exergy for A Better Environment and Improved Sustainability 2 (pp. 637-649). Springer, Cham.

08

Khechai, A., Tati, A., & Guettala, A. (2018). Numerical study of the effect of presence of geometric singularities on the mechanical behavior of laminated plates. Journal of The Institution of Engineers (India): Series C, 99(6), 717-728.

09

Tati, A., Bouadjadja, S., & Bada, Y. (2018). Free Vibration of Thermally Stressed Angle-Ply Laminated Composite Using First-Order Shear Deformation Theory Model with Assumed Natural Shear Strain. Journal of The Institution of Engineers (India): Series C, 1-11.

10

Khechai, A., Tati, A., Guettala, A., & Mohite, P. M. (2018). A general solution for stress resultants around a circular cutout in laminate plates under different in-plane loadings: analytical and experimental investigations. Archive of Applied Mechanics, 88(7), 1187-1208.

11

Khechai, A., Tati, A., Belarbi, M. O., & Guettala, A. (2018). Numerical Analysis of Stress Concentration in Isotropic and Laminated Plates with Inclined Elliptical Holes. Journal of The Institution of Engineers (India): Series C, 1-12.

12

Khechai, A., Tati, A., Guerira, B., Guettala, A., & Mohite, P. M. (2018). Strength degradation and stress analysis of composite plates with circular, square and rectangular notches using digital image correlation. Composite Structures, 185, 699-715.

13

Khoudiri, S., Benchabane, F., & Yahia, K. (2018). Nonlinear control of a grid connected hybrid energetic systems (HES) based on photovoltaic-fuel cells distributed power generation systems. Journal of Applied Engineering Science & Technology, 4(1), 29-36.

14

Kerbouche, K., Cardoso, A. J. M., Yahia, K., & Mellit, A. (2018, April). Mathematical Modelling and Simulation of a Directly Coupled Water Pumping System, Using a Photovoltaic-Fed Synchronous Reluctance Motor. In International Conference on Electronic Engineering and Renewable Energy (pp. 431-437). Springer, Singapore.

15

Benchabane, F., Guettaf, A., Yahia, K., & Sahraoui, M. (2018). Experimental investigation on induction motors inter-turns short-circuit and broken rotor bars faults diagnosis through the discrete wavelet transform. e & i Elektrotechnik und Informationstechnik, 135(2), 187-194.

16

Bayarassou, M., Zidani, M., & Farh, H. (2018). Influence of Aging Treatments on the Structural and Mechanical Properties of AGS Alloy Wire Cold Drawn. In Diffusion Foundations (Vol. 18, pp. 73-78). Trans Tech Publications.

17

Mebarki, L., Zidani, M., Boukhobza, A., Mechachti, S., & Fedaoui, K. (2018). Effect of the Proportion of Tungsten Element on the Mechanical and Structural Properties of (Fe3C-W-Ni) Sintered Alloy. In Diffusion Foundations (Vol. 18, pp. 35-40). Trans Tech Publications.

18

Khamouli, F., Zidani, M., Digheche, K., Saoudi, A., & Atoui, L. (2018). Effect of E6010 and E8018-G Fluxes Utilization on SMAW Multi-Pass Welded Steel. In Diffusion Foundations (Vol. 18, pp. 55-64). Trans Tech Publications.

19

Bayarassou, M., Zidani, M., & Farh, H. (2018). Microstructural Evolution and Mechanical Properties during Homogenization and Ageing Treatment of Al-Mg-Si Alloy Wire Cold Drawn. In International Journal of Engineering Research in Africa (Vol. 36, pp. 60-68). Trans Tech Publications.

20

Djimaoui, T., Zidani, M., Nebbar, M. C., Abid, T., Farh, H., Helbert, A. L., ... & Baudin, T. (2018). Study of Microstructural and Mechanical behavior of Mild Steel Wires Cold Drawn at TREFISOUD. In International Journal of Engineering Research in Africa (Vol. 36, pp. 53-59). Trans Tech Publications.

2017

21

Cherrad, N., Benchabane, A., Sedira, L., & Rouag, A. (2017). Effect of heating time of adsorber-collector on the performance of a solar adsorption refrigerator. International Journal of Mechanical and Materials Engineering, 12(1), 7.

22

Belarbi, M. O., Tati, A., Ounis, H., & Khechai, A. (2017). On the Free Vibration Analysis of Laminated Composite and Sandwich Plates: A Layerwise Finite Element Formulation. Latin American Journal of Solids and Structures, 14(12), 2265-2290.

23

Falaschetti, M. P., Scafè, M., Tatì, A., & Troiani, E. (2017). Experimental determination of thickness influence on compressive residual strength of impacted carbon/epoxy laminate. Procedia Structural Integrity, 3, 237-245.

24

Bouzgou, A. A., Tati, A., & Khechai, A. (2017). Analysis of deflection in isotropic and orthotropic rectangular plates with central opening under transverse static loading. In Applied Mechanics, Behavior of Materials, and Engineering Systems (pp. 399-409). Springer, Cham.

25

Belarbi, M. O., Tati, A., Ounis, H., & Khechai, A. (2017). Finite Element Based on Layerwise Approach for Static and Dynamic Analysis of Multi-layered Sandwich Plates. In Applied Mechanics, Behavior of Materials, and Engineering Systems (pp. 435-446). Springer, Cham.

26

Mechachti, S., Benchiheub, O., Abidi, A., Gherraf, N., Zidani, M., & Farh, H. (2017). Property Evaluation of Nitrided Layers of Porous Sintered Iron. In International Journal of Engineering Research in Africa (Vol. 32, pp. 11-17). Trans Tech Publications.

27

Mebarki, L., Zidani, M., Mechachti, S., Farh, H., & Miroud, D. (2017). Effect of Nickel Addition Study on the Mechanical Properties of the (Fe3C-Ni) Alloy Obtained by Solid Phase Compaction and Sintering. In International Journal of Engineering Research in Africa (Vol. 32, pp. 18-24). Trans Tech Publications.

28

Baira, F., Zidani, M., Farh, H., Messaoudi, S., Ziar, T., Helbert, A. L., & Baudin, T. (2017). Deformation and Recrystallised Texture Evolution and the Followed Mechanical and Electrical Properties of Drawn and Annealed Copper Wires. In International Journal of Engineering Research in Africa (Vol. 31, pp. 20-28). Trans Tech Publications.

29

Saoudi, A., Khamouli, F., Zidani, M., & Farh, H. (2017). Statistical Distribution Analysis of Mechanical Properties of a Welded Pipeline Steel API X70 and Correlation between Hardness and other Mechanical Characteristics. In International Journal of Engineering Research in Africa (Vol. 30, pp. 49-64). Trans Tech Publications.

30

Djemmal, K., Farh, H., Guemini, R., Zidani, M., & Serradj, F. (2017). Effect of Natural and Artificial Aging on the Mechanical Properties of Two Al-Mg-Si Alloys. In International Journal of Engineering Research in Africa (Vol. 28, pp. 1-7). Trans Tech Publications.

31

Zidani, M., Bessais, L., MESSAOUDI, S., Hadid, M. D., HICHEM, H. F., Miroud, D., ... & Baudin, T. (2016). Study of texture, mechanical and electrical properties of cold drawn AGS alloy wire. Steel and Composite Structures, An International Journal, 22, 745-752.

32

Ounis, H., & Belarbi, M. O. (2017). On the thermal buckling behaviour of laminated composite plates with cut-outs. Journal of Applied Engineering Science & Technology, 3(2), 63-69.

33

Aoues, K., Zellouf, M., Labed, A., & Moummi, N. (2017). Experimental study of drying of green chili by solar air flat plate collector used obstacles. Mechanics, 23(3), 449-455.

2016

34

F Touloum, Y Akli, K Abdelhak, A Benchabane. Formulation of a composite of date palm wood-cement. Journal of Applied Engineering Science & Technology 2 (2), 57-63 (2016).

35

A Benchabane, A Labed, A Rouag, N Boultif. Thermal design of air cooled condenser of a solar adsorption refrigerator. Journal of Applied Engineering Science & Technology 2 (1), 23-29 (2016)

36

A Labed, N Moummi, K Aoues, A Benchabane. Solar drying of henna (Lawsonia inermis) using different models of solar flat plate collectors: an experimental investigation in the region of Biskra (Algeria). Journal of Cleaner Production 112, 2545-2552(2016).

37

T Arrif, A Benchabane, A Gama, A Belaid, H Merarda. Étude Numérique des Pertes Convectives par Convection Naturelle d’un Récepteur Solaire Cylindrique. 4th International Seminar on New and Renewable Energies, Ghardaïa – Algeria (2016)

38

A Rouag, A Benchabane, A Labed, K Belhadj, N Boultif. Applicability of a solar adsorption cooling machine in semiarid regions: proposal of supplementary cooler using earth-water heat exchanger. International Journal of Heat and Technology 34 (2), 281-286 (2016).

39

MO Belarbi, A Tati, H Ounis, A Benchabane. Development of a 2D isoparametric finite element model based on the layerwise approach for the bending analysis of sandwich plates. Structural Engineering & Mechanics 57 (3), 473-506 (2016).

40

 M.ZIDANI,   M.D.HADID, T.DJIMAOUI, S.MESSAOUDI, L.BESSAIS, D.MIROUD, H.FARH,M.H.MATHONandT. BAUDIN, The influence of aging on industrially cold drawn aluminu

alloy (6101)used in the electric transmission lines, International Journal of Engineering Research in Africa (TTP indexed by: Thomson Reuters /Scopus -Elsevier) , Vol. 24, p. 9-16 (2016)

41

M.ZIDANI, M.D.HADID, T.DJIMAOUI, H.FARH, S.MESSAOUDI ,L.BESSAIS,M.H.MATHON and T. BAUDIN, Annealing effect at low temperature on the evolution of the micro structure ,mechanical and5electrical properties of a drawn aluminum wire; Proceeding METAL 2016 Brno, Czech Republic, EU, 6indexed by: Thomson Reuters /Scopus -Elsevier) pp.1595-1599 (2016)7

42

S.MESSAOUDI, M. ZIDANI, M.CHENAFI, A.MEGHAZI, M.H.MATHON8and T. BAUDIN, Monitoring the Evolution of the Properties of Aluminium AGS Alloy Wire during Drawing; Proceeding METAL 2016 ,,Brno, Czech Republic, EU, (indexed by: Thomson Reuters /Scopus -Elsevier) pp.327-332 (2016)

43

F.KHAMOULI, M.ZIDANI, H.FARH, A.SAOUDI, L.ATOUI, Effects of cellulosic and basic flux on the structure, composition and hardness of SMAW welds an steel X42, International Journal of JERA (TTP indexed by: Thomson Reuters /Scopus -Elsevier)Vol.27,pp.11-19(December 2016)

44

M.ZIDANI, L. BESSAIS, S. MESSAOUDI, M.D. HADID, H. FARH HICHEM,D. MIROUD, M.K. LOUDJANI, A.L. HELBERT, T. BAUDIN, Study of texture, mechanical and electrical properties of cold drawn AGS alloy wire, Steel and Composite Structures, An International Journal,Vol.22, n. 4,p 745-752 (Techno-press indexed by Thomson Reuters Impact factor : 1.796) (November 2016)

45

M. ZIDANI, T. DJIMAOUI et M.D. HADID. Effet du traitement thermique sur différent spropriétés de l’alliage d’aluminium AGS tréfilé industriellement. Revue science des matériaux, Laboratoire LARHYSS (N°08) Vol.7,n:2, p.35-41 (2016).

46

M.MEFTAH, M. ZIDANI, M.T.BOUZIANE et M. TATA. La protection active des anciens réseaux de la distributions de gaz naturel. Revue science des matériaux, Laboratoire LARHYSS(N°08),Vol.7,n:2, p.42-47 (2016).

47

D.MIROUD, M. ZIDANI, S. AKLOUCHE et M. TATA. Effet de la formation d'agglomératsde W/Ni au cours du chauffage sur la densification du composite W-15Ni infiltré par le bronze industriel Cu-9Ni-6Sn. Revue science des matériaux, Laboratoire LARHYSS (N°08), Vol.7,n:2,p. 01-07 (2016).

48

Yahia, K. Sahraoui, M. Cardoso, A. J. M. Ghoggal, A. The Use of a Modified Prony's Method to Detect the Airgap-Eccentricity Occurrence in Induction Motors. IEEE Transactions on Industry Applications, Vol. 52, No. 5, pp. 3869 - 387, September / October, 2016.

49

Sahraoui, M. Cardoso, A. J. M. Yahia, K. Ghoggal, A. The Use of the Modified Prony’s Method for Rotor Speed Estimation in Squirrel Cage Induction Motors. IEEE Transactions on Industry Applications, Vol. 52, No. 3, pp. 2194-2202, May / June, 2016.

50

Mohamed-Ouejdi Belarbia , Abdelouahab Tatib , Houdayfa Ounisc *and Adel Benchabane, Development of a 2D isoparametric finite element model based on the layerwise approach for the bending analysis of sandwich plates, Structural Engineering and Mechanics, Vol. 57, No. 3 (2016) 473-506

51

K. Belkaid, A. Tati, R. Boumaraf, A Simple Finite Element with Five Degrees of Freedom Based on Reddy’s Third-Order Shear Deformation Theory, Mechanics of Composite Materials, May 2016, Volume 52, Issue 2, pp 257–270

52

Meftah K., Zouari W., Sedira L. & Ayad R. Geometric non-linear hexahedral elements with rotational DOFs. Computational Mechanics. 2016; 57:37–53; DOI 10.1007/s00466-015-1220-8.

53

Sedira L., Hammadi F., Ayad R., Meftah K. & Hecini M. Discrete-finite element for nonlinear geometrical analysiMindlin s of shell structures. Computational and Applied Mathematics. 2016; 35: 951–975; DOI 10.1007/s40314-015-0279-3.

54

MO BELARBI, A TATI,  BENDING ANALYSIS OF COMPOSITE SANDWICH PLATES WITH LAMINATED FACE SHEETS: NEW FINITE ELEMENT FORMULATION, JOURNAL OF SOLID MECHANICS VOL. 8, NO. 2 (2016) PP. 280-299

55

Belarbi, M. O., Tati, A., Ounis, H., & Khechai, A. (2017). Finite Element Based on Layerwise Approach for Static and Dynamic Analysis of Multi-layered Sandwich Plates. In Applied Mechanics, Behavior of Materials, and Engineering Systems (pp. 435-446). Springer, Cham.

56

Meghezzi-Larafi, I., & Tati, A. (2016). The effective length estimation of columns in semi-rigid jointed braced frames. Journal of Applied Engineering Science & Technology, 2(2), 91-97.

57

Belkaid, K., Tati, A., & Boumaraf, R. (2016). A simple finite element with five degrees of freedom based on Reddy’s third-order shear deformation theory. Mechanics of Composite Materials, 52(2), 257-270.

2015

58

A Labed, N Moummi, A Benchabane, M Zellouf. Experimental analysis of heat transfer in the flow channel duct of solar air heaters (SAHs). International Journal Of Heat And Technology 33 (3), 97-102 (2015).

59

K Almi, S Lakel, A Benchabane, A Kriker. Characterization of Date Palm Wood Used as Composites Reinforcement. Acta Physica Polonica A 127 (4), 1072 (2015). 

60

K Almi, A Benchabane, S Lakel, A Kriker. Potential utilization of date palm wood as composite reinforcement. Journal of Reinforced Plastics and Composites 34 (15), 1231-1240 (2015).

 

61

Sahraoui, M. Cardoso, A. J. M. Yahia, K. Ghoggal, A. The Use of the Modified Prony's Method for Rotor Speed Estimation in Squirrel Cage Induction Motors. IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, Guarda, Portugal, pp. 455-460, September, 2015.

62

Yahia, K.Sahraoui, M. Cardoso, A. J. M. Ghoggal, A. The Use of a Modified Prony's Method to Detect the Airgap-Eccentricity Occurrence in Induction Motors. IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, Guarda, Portugal, pp. 441-447, September, 2015

63

Ahmed Abdelatif Bouzgou Abdelhak Khechai Abdelouahab Tati , Stress concentration and deflection in isotropic and orthotropic plates with opening. Finite element study, Revue des composites et des matériaux avancés, Lavoisier, 2015, 25 (3-4), pp.385-405

64

Mohamed Ouejdi Belarbi, Abdelouahab Tati, A new C0 finite element model for the analysis of sandwich plates using combined theories,  International Journal of Structural Engineering, vol 6 N° 3 (2015) pp 212-239  Inderscience Publishers (IEL)

65

Khmissi BELKAID, Abdelouahab TATI,  Analysis of laminated composite plates bending using a new simple finite element based on Reddy’s third order theory, Revue des Composites et des Matériaux Avancés, vol 25/1 – 2015 – pp 89-106

66

Meftah K., Sedira L., Zouari W., Ayad R. & Hecini M. A multilayered 3D hexahedral finite element with rotational DOFs. European Journal of Computational Mechanics. 2015; 24: 107–128; DOI: 10.1080/17797179.2015.1089462.

2014

67

A Rouag, A Benchabane, A Labed, N Boultif. Use of shallow geothermal energy to improve the efficiency of air heat exchangers: Proposal of a Geothermal Air-Cooler (GAC). DZ Patent 9045, App. 140719, 04-12-2014 (2014)

 

68

H Ounis, A Tati, A Benchabane. Thermal buckling behavior of laminated composite plates: a finite-element study. Frontiers of Mechanical Engineering 9 (1), 41-49 (2014).

69

M.ZIDANI, M.D.HADID, S.MESSAOUDI, F. DENDOUGA, , L.BESSAIS,. F. BAIRA, M.BAYARASSOU, A.L. HELBERT, M.H.MATHON and T. BAUDIN, The drawing process of the wires of copper and aluminium; Evolution of the microstructure and (mechanical/electrical) properties; Proceeding METAL 2014 Brno, Czech Republic, EU, (indexed by: Thomson Reuters /Scopus -Elsevier), p.442-446 (2014)

70

Matos, D. M. B. Estima, J. O.Yahia, K. Cardoso, A. J. M. Modeling and Implementation of MTPA Control Strategy for SynRM Variable Speed Drives. International Review of Electrical Engineering, Vol. 9, No. 6, pp. 1103-1110, November / December, 2014.

71

Yahia, K. Cardoso, A. J. M. Ghoggal, A.; Zouzou, S. E. Induction Motors Airgap-Eccentricity Detection Through the Discrete Wavelet Transform of the Apparent Power Signal Under Non-Stationary Operating Conditions. ISA Transactions, Vol. 53, No. 2, pp. 603–611, March, 2014.

72

Yahia, K. Cardoso, A. J. M. Ghoggal, A.; Zouzou, S. E. Induction Motors Broken Rotor Bars Diagnosis Through the Discrete Wavelet Transform of the Instantaneous Reactive Power Signal under Time-varying7Load Conditions. Electric Power Components and Systems, Vol. 42, No. 7, pp. 682-692, April, 2014.89

73

Houdayfa Ounis, Abdelouahab Tati, Adel Benchabane, Thermal buckling behavior of laminated composite plates: a finite-element study, Front. Mech. Eng. March 2014, Volume 9, Issue 1, pp 41–49

74

Khechai, A., Tati, A. & Guettala, A. , Finite element analysis of stress concentrations and failure criteria in composite plates with circular holes, Front. Mech. Eng. September 2014, Volume 9, Issue 3, pp 281–294 3.

75

Zouari W., Assarar M., Meftah K. & Ayad R. Free vibration analysis of structures with elastic and piezoelectric behaviors using specific hexahedral elements with rotational DOFs. Acta Mechanica. 2014; 226: 1737–1756; DOI: 10.1007/

2013

76

Ayad, R., Zouari, W., Meftah, K., Zineb, T. B., & Benjeddou, A. (2013). Enrichment of linear hexahedral finite elements using rotations of a virtual space fiber. International Journal for Numerical Methods in Engineering, 95(1), 46-70.

https://onlinelibrary.wiley.com/doi/abs/10.1002/nme.4500

77

Guedidi S, Zouzou SE, Laala W, Yahia K, Sahraoui M, "Induction motors broken rotor bars detection using MCSA and neural network: experimental research",  International Journal of System Assurance Engineering and Management, on line first article, doi: 10.1007/s13198-013-0149-6 (2013).

http://link.springer.com/article/10.1007%2Fs13198-013-0149-6

78

Bahlouli M.I, Bekkour K, Benchabane A, Hemar Y, Nemdili A, "The effect of temperature on the rheological behavior of polyethylene oxide (PEO) solutions", Applied Rheology 23: 13435 (2013)

http://dx.doi.org/10.3933/ApplRheol-23-13435

79

Zidani, M., Messaoudi, S., Dendouga, F., Baudin, T., Derfouf, C., Boulagroun, A., & Mathon, M. H. (2013). Study of the relation between microstructure and properties (mechanical/electrical) of copper wire drawing and annealed. Acta physica polonica A, 123(2), 470-472.

 http://przyrbwn.icm.edu.pl/APP/PDF/123/a123z2p103.pdf

80

A M.ZIDANI, S. MESSAOUDI, F.DENDOUGA, T. BAUDIN, C. DERFOUF, A.BOULAGROUN and M.H. MATHON, Multi-scale analysis by SEM, EBSD and X-ray diffraction of deformation texture of a copper wire drawn industrially; Matec web of conference (Published by EDP Sciences indexed by Scopus, Web of science) , Vol.5, n:04004,p.1-3 (2013).

81

M.ZIDANI, F. DENDOUGA, S.MESSAOUDI, L.BESSAIS, M.D.HADID. C. DERFOUF,A.L. HELBERT and T. BAUDIN, Characteristics of Texture Evolution of Copper Wire Drawn Distended for Electrical Cabling by Electron Back Scattering Diffraction; Proceeding METAL2013 Brno, Czech Republic, EU, (indexed by: Thomson Reuters /Scopus -Elsevier), p.502-506 (2013).

82

S.MESSAOUDI, M.ZIDANI, M.H. MATHON AND T. BAUDIN, Evolution of Texture and Mechanical and Electrical Properties in the Copper Wires: Drawn and Annealed; ProceedingMETAL 20163 Brno, Czech Republic, EU, (indexed by: Thomson Reuters /Scopus -Elsevier), p.1085-1900 (2013).

83

Zidani MMessaoudi SDendouga F, Baudin T, Derfouf C, Boulagroun A, Mathon M.H, Multi-scale analysis by SEM, EBSD and  X-ray diffraction  of deformation texture of a copper wire drawn industrially , Matec web of conferences ( accepted 2013)

2012

84

Elie-Dit-Cosaque X, Chebbah M.S, Naceur H, Gakwaya A, "Analysis and design of hydroformed thin-walled tubes using enhanced one-step method", International Journal of Advanced Manufacturing Technology 59:507-520 (2012).

www.springerlink.com/index/MH6735132M2Q5259.pdf

85

Mansouri M, Belghar N,"Simulation par fluent du refroidissement des aubes d'une turbine a gaz", International Journal of Chemical and Petroleum Sciences 1: 27-32 (2012).

https://www.asjp.cerist.dz/en/article/4525

86

Meftah K, Ayad R, Hecini M, "A new 3D 6-node solid finite element based upon the ‘Space Fibre Rotation’ concept", European Journal of Computational Mechanics/Revue Européenne de Mécanique Numérique. iFirst Article 1-29 (2012).

http://dx.doi.org/10.1080/17797179.2012.721502

87

Labed A, Moummi N, Benchabane A, "Experimental investigation of various designs of solar flat plate collectors: Application for the drying of green chili",  J. Renewable Sustainable Energy 4: 043116 (2012).

http://dx.doi.org/10.1080/14786451.2011.590899

88

Labed A, Moummi N, Benchabane AAoues K, Moummi A, "Performance investigation of single- and double-pass solar air heaters through the use of various fin geometries", International Journal of Sustainable Energy 31:423-434 (2012).

http://dx.doi.org/10.1063/1.4742337

89

Benlahmidi S, Moummi N, Moummi A, Aoues K, Labed A, "Réalisation d’une interface de simulation des performances des insolateurs plans",  Courrier du savoir 13: 35 (2012).

http://revues.univ-biskra.dz/index.php/cds/article/download/424/393/0

 

 

Communications  internationales

01

A Labed, N Moummi, A Benchabane, M Zellouf (2015), Experimental analysis of heat transfer in the flow channel duct of solar air heaters (SAHs)

International journal of heat and technology 33 (3), 97-102

 

02

Sahraoui, M.; Cardoso, A. J. M.; Yahia, K.; Ghoggal, A.: ''The Use of the Modified Prony's Method for Rotor Speed Estimation in Squirrel Cage Induction Motors''; IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, Guarda, Portugal, pp. 455-460, September, 2015.

 

03

Yahia, K.; Sahraoui, M.; Cardoso, A. J. M.; Ghoggal, A.: ''The Use of a Modified Prony's Method to Detect the Airgap-Eccentricity Occurrence in Induction Motors''; IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, Guarda, Portugal, pp. 441-447, September, 2015.

 

04

Yahia, K.; Estima, J. O.; Cardoso, A. J. M.: ''Modeling Synchronous Reluctance Motors Including Saturation, Iron Losses and Mechanical Losses''; International Symposium on Power Electronics, Electrical Drives, Automation and Motion, Ischia, Italy, pp. 595-600, June, 2014.