C/ internationales Equipe 4

01

S. E. Zouzou,  A. Kedous-Lebouc, B. Cornut  and  P. Brissonneau,  "Magnetic losses under rotational field", Conference of the research actions for the Ministry of Research and the Technology - Electrical Engineering, 5-6 November 1991, PP.173-182, Paris, France.

02

S. E. Zouzou, A. Kedous-Lebous, P. Brissonneau, "Magnetic properties under unidirectional and rotational field",  Tenth International Conference on Soft Magnetic Materials, SMM, 11-13 September 1991, Dresden, Germany.

03

A. Kedous-Lebouc, S. E. Zouzou and P. Brissonneau, "On the magnetizing processes in electrical steel in unidirectional and rotational field", First international workshop on magnetic properties of electrical sheet steel under two-dimentional excitation, physikalisch technische bundesanstalt , April 1992, pp.36-47,Germany

04

A. Kedous-Lebouc, S. E. Zouzou, P. Brissonneau, "Anisotropy influence on the rotational and alternating field behavior of soft magnetic materials", International Magnetics Conference INTERMAG 1992, 13-16 April 1992, St. Louis, MO, USA.

05

S. E. Zouzou, "Magnetic study of the field and induction distribution on the surface of a magnetic sheet of a rotating field tester", Second International conference on automatic, Electronics and Industrial Electronics, COMAEI 96, 3-5 December 1996, Tlemcen.

06

S. E. Zouzou, "Numerical Modeling of rotational power losses tester", International Conference on Electro technique, ICEL 1998, 5-7 October 1998, Oran.

07

S. E. Zouzou, "Numerical Modeling of rotational power losses tester", International Conference on Electro technique, ICEL 1998, 5-7 October 1998, Oran.

08

A. Cheriet , S. M. Mimoune, K. Srairi, J. Fouladgar, “Nouvelle interpolation numérique dans la méthode des volumes finis appliquée  aux dispositifs électromagnétiques présentant une faible épaisseur de peau”, Proceding of the International Conference on Electrotechnics, ICEL’2000, pp. 604-606, Vol.2, 13-15 Nov. 2000, Oran Algeria.

09

S. M. Mimoune, F. M. Aref, A. Cheriet, A. Salhi, K. Srairi, J. Fouladgar
M. Feliachi, R. Baron, “Impedance calculation in 3D eddy current non destructive evaluation by control volume method using the A-V formulation with the driven current source model”, The Tenth Biennial IEEE Conference on Electromagnetic Field Computation CEFC’02, Proc., No. 248, Jun. 2002, Perugia Italy.

10

M. Sahraoui, S. E. Zouzou, A. Aboubou, "Diagnosis of rotor faults in three-phase induction motors by the extended Park's vector approach", First  International Conference on the Electrical Energy and its Applications , 24-25 May 2004, Sidi bel-Abbès.

11

M. Sahraoui, S. E. Zouzou, A. Aboubou, and A. Ghoggal,  "Comparative study of two Method dedicated to the detection of the broken bars in  induction motors ", First International Conference on Electrical Engineering, CEE 2004, 04-06 October 2004, Batna.

12

M. T. Benchouia, S. E.  Zouzou, A. Golea, "Modeling and simulation of variable speed system with fuzzy logic", First International Conference on Electrical Engineering, CEE’04, 04-06 October 2004,  Batna.

13

M. Sahraoui, A. Aboubou, A. Menacer, S. E. Zouzou,  and A. Derghal, "Method dedicated to the detection of the broken bars in three-phase squirrel-cage induction motors with instantaneous power", International Conference on Electrical and Electronics  Engineering, ICEEE 2004, 24-26 April 2004, Laghaout.

14

A. Bensalem, S. E. Zouzou, "Economic dispatch of the production of power", International Conference on Electrical and Electronics Engineering, Communication and Physical Systems, 04-05 May 2004, Saida..

15

A. Bensalem, S. E. Zouzou, A. Bouhentala  and  M. Laouer, "Optimal distribution of the production of power plants by the method of the increased lagrangien", First international Conference on Electrical Engineering, CIGE 2004, 03-05 october 2004, Bechar.

16

S. E. Zouzou, M. Sahraoui,  A. Aboubou, A. Menacer and A. Derghal, "Method dedicated to the detection of the broken bars in three phase squired cage induction motors", Third International conference on Electrical Engineering and Automatics, JTEA 2004, 21-23 May 2004, Hammamet, Tunisia.

17

A. Aboubou, H. Razik, M. Sahraoui,  S. E. Zouzou, and  A. Rezzoug, "Broken bars and/or end rings detection in three-phase induction motors by the extended Park's vector approach", 9th IEEE International Power Electronics Congress, CIEP 2004, 17-22 October 2004, PP. 128-133, Celaya, Mexico.

18

M. T. Benchouia, S. E. Zouzou, A. Golea, "An Adaptive fuzzy logic DC output controller with minimization harmonics of side network", IEEE International Conference on Industrial Technology, ICIT 2004, 8-10 December 2004, Vol. 3, PP.1239-43, Hammamet, Tunisia

19

M. T. Benchouia, S. E. Zouzou, A. Golea, "Modeling and simulation of variable speed drive system with adaptive fuzzy controller application to PMSM", IEEE International Conference on Industrial Technology, ICIT 2004,  8-10 December 2004, Vol. 2, PP.683-7 , Hammamet, Tunisia

20

M. T. Benchouia, S. E. Zouzou, A. Golea, "Modeling and simulation of variable speed system with different regulators ", International Conference on Electrical Machines and Systems, ICEMS 2004, 1-3 November 2004, Seoul, Korea.

21

M. T Benchouia, S. E. Zouzou, A. Golea, "AC/DC /AC PWM three phase utility to provide a  regulated DC output and to minimize line currents harmonics using fuzzy adaptative controller", International Conference on Electrical Machines and Systems, ICEMS 2004, 1-3 November 2004, Seoul, Korea.

22

M. T. Benchouia, A. Golea and S. E. Zouzou, "AC/DC/AC Converter three phase utility to provide a regulated DC output and to minimized line currents harmonics using fuzzy adaptive control",, The International Conference on Electrical Machines and Systems (ICEMS 2004), November 1-3, 2004, SEOUL, KOREA..

23

M. T. Benchouia, A. Goléa, S. E. Zouzou, "Ac/DC/AC PWM Converter Three Phase Utility to provide a Regulated DC Output and to Minimized Line Current Harmonics using Adaptive Fuzzy Controller", International Conference on Electrical Machines and systems (ICEMS 2004), Seoul, Korea, November 1-3, 2004.

24

M.T.Ben chouia    S. E. Zouzou A. Ghamri   A. Golea, "Modeling and simulation of variable speed drive system with adaptive fuzzy controller application to PMSM", Proceeding of the IEEE International Conference on Industrial Technology, IEEE ICIT 04,(Eds),Vol. 2, pp683-687, 08-10 December  2004.

25

M.T.Benchouia S. E. Zouzou A. Golea A. Ghamri, "Adaptive Fuzzy Logic output controller with minimization harmonics of side network", Proceeding of the IEEE International Conference on Industrial Technology, IEEE ICIT 04,(Eds),Vol.3, pp1239-1243 08-10 Dec 2004

26

M.T. Benchouia, S. E. Zouzou, A. Golea and A.Ghamri, “Modeling and Simulation of Variable Speed Drive System with Different Regulators”, the International Conference on Electrical Machines 3and Systems (ICEMS 2004), November 1-3, 2004, SEOUL, KOREA.

27

M.T Benchouia, A. Golea, S.E Zouzou,  A. Ghamri, Modelling and simulation of variable speed drive system using fuzzy and sliding mode controllers", 21-24 Mars 2005 Sousse Tunisia

28

M.T. Benchouia, S. E. Zouzou, A. Golea and A.Ghamri, “Modelling and Simulation of Variable Speed Drive System using Fuzzy and sliding mode controllers”, Third International Conference on Systems, Signals and Devices, (IEEE SSD'05), March 21-24, 2005, Sousse, Tunisia, Vol.1, Tunisia.

29

M.T. Benchouia, A. Golea, A.Ghamri, S. E. Zouzou, “Control of the DC Output Voltage of the AC/DC Converter using Adaptive Fuzzy Controller”, First International Conference on Electrical Systems (IEEE PCSE’05), May 9-11, 2005, O. E. Bouaghi Univ., Algeria.

30

S. E. Zouzou, H. Razik, A. Aboubou, M. Sahraoui, A. Ghoggal, "Modelling of Induction Machines with Skewed Rotor Slots Dedicated to Rotor Faults", 5th IEEE Symposium on Diagnostics for Electric Machines Power Electronics and Drives, SDEMPED 2005, 7-9 September 2005, Vienna, Austria.

31

A. Ghoggal, S. E. Zouzou, A. Aboubou, M. Sahraoui, "A 2D model of induction machine dedicates to faults detection–Extension of the modified winding function", International Conference on Electrical Systems, ICES 2006, 09-11 May 2005,  Oum El Bouaghi,

32

A.Ghoggal, M. Sahraoui, A. Aboubou, S. E. Zouzou, H. Razik, "An improved model of the induction machine dedicated to faults detection extension of the modified winding function", IEEE International Conference on Industrial Technology, ICIT 2005, 14-17 December 2005, PP.191-196, Hong Kong, China.

33

A. Bensalem, A. Bouhentala, S. E. Zouzou, "Optimal ménagement of the production of the hydroelectric power plants ", Conseil International des Grands Réseaux Électriques (International board of the Big Electricity networks), CIGRE 21-23 November 2005, Caire, Egypte.

34

M. T. Benchouia, A. Golea, S. E. Zouzou, A. Ghamri, "Adaptive Fuzzy Control of Reversible Rectifier Feeding Induction Motor With Improved Power Factor", International Conference on Electrical Machines, ICEM 2006, 2-5 september 2006, Chania, Greece.

35

M.T.Ben chouia  A. Golea,  S.E.Zouzou, A. Ghamri, "Adaptive Fuzzy Control of Renersible Rectifier Feeding Induction Motor With Improved Power Factor "

36

Bensalem ,A. Miloudi, S. E. Zouzou, B. Mahdad, A. Bouhentala, "Daily optimal operation policy of hydroelectric power systems, " International Conference on Electrical Systems, ICES 2006, 8-10 May 2006, Oum el bouaghi

37

A. Ghoggal, A. Aboubou, M. Sahraoui, S. E. Zouzou, H. Razik, "Experimental and computed results concerning the diagnosis of broken rotor bars of the induction motors", International conference on the Electrical energy and its Applications, 22-23 May 2006, Sidi Bel-Abbes.

38

A. Ghoggal, S. E. Zouzou, A. Aboubou, M. Sahraoui, H. Razik, "Experimental and computed results about the air-gap eccentricity faults in 2-pole induction motors considering the star stator winding coupling",  Second International Conference on Electrical Engineering, 07-08 November 2006, Batna.

39

A. Bensalem, A. Miloudi, S. E. Zouzou, B. Mahdad, A. Bouhentala, "Deterministic hydropower management of large power system", Second International  Conference on Electrical Engineering, 7-8 November 2006, Batna

40

A. Ghoggal, S. E. Zouzou, A. Aboubou, M. Sahraoui, "A 2D model of induction machine dedicates to faults detection–Extension of the modified winding function", International Conference on Electrical Systems, ICES 2006, 09-11 May 2006,  Oum El Bouaghi,

41

A. Ghoggal S. E. Zouzou, "Note about inductances calculation of induction motor under radial and  axial- air gap eccentricity", International Conference on Electrical Machines, ICEM 2006, 2-5 September 2006, Chania, Greece

42

M. Sahraoui, A. Ghoggal, S. E. Zouzou, H. Razik, "Modelling and detection of inter-turn short circuits in stator windings of induction motor", 32nd Annual Conference on IEEE Industrial Electronics , IECON 2006, 6-10 November 2006, PP. 4981-4986, Paris, France.

43

A. Ghoggal, A. Aboubou, S. E. Zouzou,  H. Razik, "Considerations about the modeling and simulation of air-gap eccentricity in induction motors", 32nd Annual Conference on IEEE Industrial Electronics, IECON 2006, 6-10 November 2006, PP.4987-4992, Paris, France

44

M. T. Benchouia, A, Ghamri, A. Golea, M. E. H Benbouzid and S. E. Zouzou, "Fuzzy model reference adaptive control of power converter for unity power actor and harmonics minimization ", International Conference on Electrical Machines and Systems, ICEMS 2007, 8-11 October 2007, PP.1239-1243, Seoul, South Korea.

45

A. Cheriet, A. Zaoui, M. Feliachi, S. M. Mimoune, “Computational performance comparison between FVM and FEM for 3-D magnetostatic problems”, 5eme Conférence européenne sur les méthodes numériques en électromagnétisme NUMELEC’06, Proc., No. 47, Nov. 2006, Lille France.

46

A. Cheriet, S. M. Mimoune, M. Feliachi, “3-D nonlinear magnetostatic field computation with finite volume method by means of M-B iteration”, 5eme Conférence européenne sur les méthodes numériques en électromagnétisme NUMELEC’06, Proc., No. 25, Nov. 2006, Lille France.

47

M.T. Benchouia,  A.Ghamri, M.E.H. Benbouzid, A.Golea, S. E .Zouzou, "Fuzzy Model Reference Adaptive Control of power converter for unity power factor and harmonics minimization", Proceeding of the IEEE  International Conference  on Electrical Machines and Systems IEEE ICEMS 2007,Vol. , pp1239-1243, October 2007.

48

A.Ghamri, M.T.Benchouia, M.E.H.Benbouzid A.Golea, S. E. Zouzou, "Simulation and Control of AC/DC Converter and Induction Machine Speed Using Adaptive Fuzzy Controller", Proceeding of the IEEE  International Conference  on Electrical Machines and Systems IEEE ICEMS 2007 ,Eds, Vol., pp539-542, October 2007.

49

M. T. Benchouia, A. Ghamri, A. Golea, M. E. H. Benbouzid and S. E. Zouzou, "Simulation and Control of AC/DC Converter and Induction Machine Speed Using Adaptive Fuzzy Controller ", International Conference on Electrical Machines and Systems ", ICEMS 2007, 8-11 October 2007, PP. 539-542, Seoul, South Korea.

50

A. Cheriet, M. Feliachi, S. M. Mimoune, “3-D movement simulation technique in FVM method application to eddy current non-destructive testing”, The XIV International Symposium on Theorical Electrical Engineering ISTET’07, Jun. 2007, Szczecin Poland.

51

A. Bensalem, A. El-Maouhab, B. Mahdad, A. Bouhentala, S. E. Zouzou, "Optimal management of waters used for the production of the electrical energy", International Conference on the Electrical Energy and its Applications, 20-22 May  2008, Sidi Bel-abbes.

52

A. Ghoggal, M. Sahraoui, S. E. Zouzou,  A. Aboubou, "Analytical studies of broken rotor bars related harmonics in induction motors," International Conference on the Electrical Energy and its Applications, 20-22 May 2008, Sidi Bel-Abbes

53

B. Helifa, A. Zaoui, M. Feliachi, I. K. Lefkaier, F. Boubendir, A. Cheriet, “Simulation du CND par courants de Foucault en vue de la caractérisation des fissures débouchantes dans les aciers austénitiques”, 6eme Conférence européenne sur les méthodes numériques en électromagnétisme NUMELEC’08, Proc., No. 48, Dec. 2008, Liège, Belgique.

54

S. E. Zouzou, W. Laala, S. Geudidi, M. Sahraoui,  "A fuzzy logic approach for the diagnosis of rotor faults in squirrel cage Induction Motors", International Conference on Computer and Electrical Engineering , ICCEE 2009, 28-30 December 2009, PP.173-178, Dubai, UAE.

 54

A. Cheriet, M. Feliachi, S. M. Mimoune, M. Hamimid, “Steady-state analysis of an electromagnetic levitation device by a new 3D unstructured finite volume method”, The XV International Symposium

on Theorical Electrical Engineering, ISTET’09, Jun. 2009, Lubeck Germany. www.istet09.de.

55

A. Ghoggal, A. Hadri-Hamida, S. E. Zouzou, "Modélisation de la saturation magnétique dans les machines asynchrones tenant compte des harmoniques d’espace et du modèle multi-enroulement", CEE 2010, Université de Batna, Octobre 2010.

56

M. Sahraoui, S. E. Zouzou, A. Ghoggal, and S. Guedidi , "A New Method to Detect Inter-Turn Short-Circuit in Induction Motors", International Conference on Electrical Machines,  ICEM 2010, 6-8 september 2010, Rome, Italy.

57

S. E. Zouzou, M. Sahraoui, A. Ghoggal, and S. Guedidi, " Detection of Inter-Turn Short-Circuit and broken Rotor Bars in Induction Motors Using the Partial Relative Indexes: Application on the MCSA ", International Conference on Electrical Machines,  ICEM 2010, 6-8 september 2010, Rome, Italy.

58

Ghoggal, S. E. Zouzou, H. Razik, A. Hadri-Hamida, M. Sahraoui, "Application of the Convolution Theorem for the Modeling of Saturated Induction Motors", 36nd Annual Conference on IEEE Industrial Electronics, IECON 2010, 7-10 November 2010,  Glendale, AZ, USA.

59

A. Lakhdari, A. Cheriet, M. Feliachi, "Modélisation d’un capteur différentiel de CND-CF par la méthode des volumes finis", CEE’10, 6th International Conference on Electrical Engineering, pp. 492-495, Oct. 2010, Batna, Algeria.

60

K. Yahia, S. E. Zouzou, A. R. Guattaf, F. Benchabane, D.Taibi, "Comparative Study of an Adaptive Luenberger Observer and Extended Kalman Filter Based a Sensorless DirectVector Control

of Induction Motor", 6 th International Conference on Electrical Systems and Automatic Control , JTEA 2010 26-28 March 2010,   Hammamet, Tunisia.

61

M.T.Benchouia  A. Golea  S.E. Zouzou A. Ghamri, "Adaptive Fuzzy Control of Renersible Rectifier Feeding Induction Motor With Improved Power Factor "

62

Chennai salim, Benchouia M-T, Goléa.A, Zouzou S.E “Application des réseaux de neurones dans la commande d’un filtre actif parallèle en utilisant Matlab-Simulink”,  6th International Conference on Electrical Engineering’2010, CEE’2010, Université de Batna, Algeria, 11- 13 October 2010.

63

Chennai salim, Benchouia M-T, Goléa.A, Zouzou S.E “Utilisation des réseaux de neurones dans l’implémentation de la technique de commande SVPWM sous Matlab-Simulink”,  6th International Conference on Electrical Engineering’2010, CEE’2010, Université de Batna, Algeria, 11- 13 October 2010.

64

W. Laala, S. Guedidi, S. E. Zouzou, "Novel approach for diagnosis and detection of broken bar in induction motor at low slip using fuzzy logic",11th IEEE Symposium on Diagnostics for Electric Machines Power Electronics and Drives, SDEMPED 2011, 5-7 September 2011, Bologna, Italy

65

S. E. Zouzou,  S. Khelif, N. Halem, and M. Sahraoui, ”Analysis of induction motor with broken rotor bars using finite element method”,  2nd International Conference On Electric Power and Energy Conversion Systems (EPECS), Sharjah , UAE, 15-17 Nov 2011.

66

S. Guedidi, S. E.  Zouzou, W. Laala, M. Sahraoui and K. Yahia, "Broken bar fault diagnosis of induction motors using MCSA and neural network",11th IEEE Symposium on Diagnostics for Electric Machines Power Electronics and Drives, SDEMPED 2011, 5-7 September 2011, Bologna, Italy

67

I. Lakhdari, A. Cheriet, M. Feliachi, Y. Li, "Estimation of a Hidden Crack Position Using the FVM Skin Effect Analysis", ISEM’11, Sep. 2011, Napoli, Italy. www.isem2011.unina.it.

68

A. Cheriet, M. Feliachi, A. Lakhdari, “Dynamic Characteristic Analysis of Eddy Current-Driven Electromechanical Device Using FVM Method”, Electrimacs 2011, 6-8th Jun. 2011, Université de Cergy-Pontoise, France. www.u-cergy.fr/electrimacs 2011.

69

Ghoggal, S. E.  Zouzou, M. Sahraoui,H. Derghal,A. Hadri-Hamida, "A winding function-based model of air-gap eccentricity in saturated induction motors" , International Conference on Electrical Machines, ICEM 2012, 2-5 September 2012,Marseille France.

70

M. Sahraoui, S.E. Zouzou, A. Ghoggal, S. Guedidi and H. Derghal, "An Improved Algorithm for Detection of Rotor Faults in Squirrel Cage Induction Motors Based on a New Fault Indicator," in Proc. ICEM'12, pp. 1570-1576, Marseille France, September 2-5, 2012, http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6350088

71

A. E. Mabrouk, A. Cheriet, M. Feliachi, A. Lakhdari “Transient Axisymmetric FVM Analysis of Electodynamic Levitation Devices”, NUMELEC’12, Jul. 2012, Marseille, France. www.aimontefiore.org/numelec 2012, http://journals.cambridge.org/abstract_S1286004213304340

72

A. Lakhdari, A. Cheriet, M. Feliachi, I. N. El-Ghol, “3D FVM skin effect model for hidden crack position evaluation”, International Conference on Electrotechnics, ICEL’2013, Dec. 2013,USTO, Oran, Algeria.

73

Abdelli, A. Cheriet, S. Bensaid, “Modélisation et réalisation d’un capteur inductif dédié à la caractérisation electromagnétique d’un tube d’Acier”, International Conference on Electrotechnics, ICEL’2013, Dec. 2013,USTO, Oran, Algeria, http://dspace.univ-bouira.dz:8080/jspui/handle/123456789/1709

74

A. E. Mabrouk, S. E. Zouzou, M. Sahraoui and S. Khelif , ‘‘ Discriminating time-varying loads and rotor cage fault in Induction motors ’’, IEEE Symposium on Diagnostics for Electric Machines Power Electronics and Drives, SDEMPED , 27-30 Augest, 2013, Valancia, Spain, http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6645733

75

D. Abdelli, A. Cheriet, S. Bensaid, “Modélisation Tridimensionnelle par la MVF d'un problème électromagnétique de forme complexe ”, Conférence internationale sur le génie électrique, 2015, Université de Djelfa.

76

I. Harzelli, A. Cheriet, “Computational performance comparison between FVM with triangular and rectangular meshes for 2-D magnetostatic problems”,  4th International Advances in Applied Physics and Materials Science Congress APMAS, Avr. 2014, Fethiye-Mugla, Turkey.

77

A. Cheriet, M. Feliachi, R. Benghalia, “Novel Electromagnetic MEMS Actuator for Valveless Micropump”,  10th European Conference on Magnetic Sensors and Actuators, Jul. 2014, Vienna, Austia.

78

M. Sahraoui, A. J. M. Cardoso and A. Ghoggal, “The Use of a Modified Prony’s Method to Track the Broken Rotor Bars Characteristic Frequencies and  Amplitudes, in Three-Phase Induction Motors,” Proceedings of the 22nd International Symposium on Power Electronics, Electrical Drives, Automation and Motion, Ischia, Italy, June 18-20, DOI: 10.1109/SPEEDAM.2014.6871940, pp. 210-215, 2014.http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6971115

79

N. Bessous, S. E. Zouzou, N. Halem, ’’ Calculation of Induction Machines Inductances under Outer Raceway Defect’, IEEE Symposium on Diagnostics for Electric Machines Power Electronics and Drives” SDEMPED , 01-05 september, 2015, Guarda, Portugal, http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=7303683

80

M. Sahraoui, A. J. M. Cardoso, K. Yahia and A. Ghoggal, “The Use of the Modified Prony’s Method for Rotor Speed Estimation in Squirrel Cage Induction Motors,” Proceedings of the 10th International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, Guarda, Portugal, September 1-4, pp. -, 2015, http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=7303729,

81

K. Yahia, M. Sahraoui, A. J. M. Cardoso and A. Ghoggal, “The Use of a Modified Prony’s Method to Detect the Airgap-Eccentricity Occurrence in Induction Motors,” Proceedings of the 10th International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, Guarda, Portugal, September 1-4, pp. -, 2015, http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=7303727

82

N. Bessous, S. E. Zouzou “Experimental Exploitation for the Diagnosis of the Induction Machine under a Bearing Fault – using MCSA – “, ICEE’15, December 13-15, 2015, Boumerdes  - ALGERIA -

83

A.E Mabrouk,S.E.Zouzou,Member, «Diagnosis of Rotor Fauts in Three-Phase Induction Motors under time-Varying Loads, IEEE Symposium on Diagnostics for Electric Machines Power Electronics and Drives, SDEMPED , 01-05 september, 2015, Guarda, Portugal http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=7303717

84

A. Lakhdari, A. Cheriet, I. N. El-Ghoul, A. E. Mabrouk, “Estimation de la position d’une fissure enfouie par un capteur inductif differentiel”, Conférence Nationale sur l’Inductique CNI’13, Avr. 2013, Université de Tizi-Ouzou.

85

A. E. Mabrouk, S. E. Zouzou, M. Sahraoui, ''Impedance analyses for discriminating mechanical load unbalances from rotor cage fault '', The 5th International Conference on Electronic, Engineering, ICEE2013, NOVEMBER 20 – 21, 2013 , ORAN, Algeria.

86

S.E. Zouzou , A.E.Mabrouk; ‘’Rotor bar fault diagnosis by the instantaneous power factor signator analysis’’,Cinquième conférence internationale sur l'électrotechnique, Oran, Algérie; 12/2013

87

D. Abdelli, A. Cheriet, S. Bensaid, “ Modélisation et Réalisation d’un Capteur Inductif Dédié à la Caractérisation Électromagnétique d’un Tube d’Acier, 2013, Université d’Oran, http://dspace.univ-bouira.dz:8080/jspui/handle/123456789/1709

88

A. Cheriet, A. Lakhdari, “Contrôle non destructif par les courants de Foucault”, Quatrième école sur les technique de caractérisation des matériaux, Mar. 2014, Université de Biskra.

89

I. Amrani, A. Cheriet “Conception d'un micro-actionneur Electromagnétique à Aimant Permanant”, Conférence Nationale sur l’Inductique, 2015, Université de Jijel.

90

I. N. Elghol, A. Cheriet “ Evaluation de l’épaisseur des plaques conductrices par la Méthode des Courants de Foucault ”, Conférence Nationale sur l’Inductique, 2015, Université de Jijel.

91

 Abdelhamid MABROUK , S. E. ZOUZOU, ‘’Distinction des défauts rotoriques d’effet de charge dans la machine asynchrone’’, The 1st International Conference on Applied Automation and Industrial Diagnostics, Djelfa, Algeria; 03/2015

92

N. Bessous, S. E. Zouzou, ’’Detection of Static and Dynamic Eccentricity Faults in Induction Machines by  MCSA Method’’, Deuxième Conférence Internationale en Sciences et Technologies Electriques au Maghreb CISTEM 2016, 26-28 Octobre, 2016, Marrakech, Maroc.

93

N. Bessous, S. E. Zouzou, ’’Detection and Diagnosis of Static Eccentricity Fault in Induction Machines Using the MCSA and DWT Method’’, Deuxième Conférence Internationale en Sciences et Technologies Electriques au Maghre,  CISTEM 2016, 26-28 Octobre, 2016, Marrakech, Maroc.

94

N. Bessous, S. E. Zouzou, A. Chemsa, ’’A New Analytical Model Dedicated to Diagnose of the Rolling Bearing Damage in Induction Motors -Simulation and Experimental Investigation”, 4th International Conference on Control Engineering & Information Technology, CIET, 16-18 December 2016, Hammamet, Tunisie.

95

N. Bessous, S. E. Zouzou, W. Bentrah, S. Sbaa ‘’ A Comparative Study between the MCSA, DWT and the Vibration Analysis Methods to Diagnose the Dynamic Eccentricity Fault in Induction Motors’’, The 6th International Conference on Systems and Control, Mai 2017, Batna, Algeria.

96

N. Bessous, S. E. Zouzou, W. Bentrah, S. Sbaa, ‘’Application of New Quantitative and Qualitative Study Based on DWT Method to Diagnose the Eccentricity Fault in Induction Motors’’, The 5th International Conference on Electrical Engineering, October 29-31, 2017, Boumerdes, Algérie.

97

N. Bessous, S. E. Zouzou, S. Sbaa W. Bentrah, Z. Becer and R. Ajgou,‘’ Static Eccentricity Fault Detection of Induction Motors using MVSA, MCSA and Discrete Wavelet Transform (DWT)’’, The 5th International Conference on Electrical Engineering – Boumerdes (ICEE-B), October 29-31, 2017, Boumerdes, Algeria.

98

N. Bessous, S. E. Zouzou, S. Sbaa W. Bentrah, Z. Becer and A. Khelil, ’’New Vision about the Overlap Frequencies in the MCSA-FFT Technique to Diagnose the Eccentricity Fault in the Induction Motors’’, The 5th International Conference on Electrical Engineering – Boumerdes (ICEE-B), October 29-31, 2017, Boumerdes, Algeria.

99

 S. BENSAID, M.A. BOUDREF, W. MOUILID, Y. LOUZANI, A. CHERIET, “Identification Simultanée de la Conductivité Electrique et de la Perméabilité Magnétique d’un Matériau en Acier”, 10ème Conférence sur le Génie Electrique, EMP, Alger. 2017.

100

I. Amrani, A. Cheriet, M. Feliachi, “Arbitrary Movement Simulation Using 3D NC-FVM for Electromagnetic Problems”, XIX international conference ISTET, Jul. 2017, Ilmenau, Germany.

101

A. Lakhdari, A. Cheriet, ‘’Gap Estimation of Disbanding Failure Appears in Hybrid Laminate Material by Means of an Eddy Current Evaluation’’, International conference CISTEM, Oct. 2018, Alger, Algeria.

102

I. Amrani, A. Cheriet, M. Feliachi, “Design of a Large Displacement Contactless Electromagnetic Micro-actuator for Disposable Micro-pump”, 5ème Colloque CNI, USTO Oran, 2017.

103

I. N. Elghoul, A. Cheriet, S. Bensaid, et al., “Application Labview dédiée à la mesure d’épaisseur par courants de Foucault”, 5ème Colloque CNI, USTO Oran, 2017.

104

H. Nebair, A. Cheriet, I. N. Elghoul, B. Helifa, S. Bensaid, I. Lefkaier, “Mesure de l’épaisseur des plaques métalliques épaisses par courants de Foucault”, 5ème Colloque CNI, USTO Oran, 2017.

105

K. Laadjal, M. Sahraoui, A. J. M. Cardoso, and A. M. R. Amaral , ‘’On-line Estimation of Aluminum Electrolytic-Capacitor Parameters Using a Modified Prony’s Method’’, Proceedings of the 11th International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, Tinos, Greec, August 29th- September 1st 2017

106

D. Abdelli, S. Clenet, T. T. Nguyen, A. Cheriet , ‘’Probability of Detection Estimation in Eddy Current NDT using a Stochastic Meta model’’,The Eighteenth Biennial IEEE Conference on Electromagnetic Field Computation CEFC, Oct.2018, Hangzhou, China.

107

A. Lakhdari, A. Cheriet, ‘’Numerical analysis of eddy current distribution in laminated CFRP Materials’’, The 6th International Conference on Welding, Non Destructive Testing and Materials Industry IC-WNDT-MI, Nov. 2018, Skikda, Algeria.

108

N. BENBAHA, F. ZIDANI, M.NAIT-SAID, S.E.ZOUZOU, S.BOUKEBBOUS, H.AMMAR, ‘’DSPACE Validation of Improved Backstepping Optimal Energy Control for Photovoltaic Systems International Renewable Sustainable and Energy Conversion’’, Dec 05-08; 2018, Rabat Maroc.

109

K. Laadjal, S. E. Zouzou and M. Sahraoui, ‘’Diagnosis of Stator Inter-turn Short circuits in Induction Motor using Finite Element Method’’, International Conference On Electrical Engeneering 17-18 Decembre 2018, Biskra, Algeria.

110

A. Hadri Hamida, A. Ghoggal And F. Khelili, ‘’Étude qualitative des convertisseurs multicellulaires entrelacés par la théorie de bifurcation’’, SGE 2018- "3ème Symposium de génie électrique " - Nancy – France.

111

A. Hadri Hamida,  A. Ghoggal , F. Khelili and S. Zerouali, ‘’Second-Order Sliding Mode Control Scheme with a Non-Linear Phenomenon Analysis of a DC-DC Power Converter Dedicated to Distributed Power System’’s, IC2EM’ 2018, International Conference on Electronics, Energy and Measurement, Algiers, Algeria.

112

M.Sellali, A.Betka, S.Drid, S.Abdedaim, S.E.Zouzou and M.Becherif , H infinity-Back stepping control implementation of battery/super capacitor for electric vehicules, International conference on energy and renewable energy , October 28-30, 2018 Sousse, Tunisie.

113

F. Benchabane,  A. Guettaf, K. Yahia,  M. Sahraoui “Experimental investigation on induction motors inter-turns short-circuit and broken rotor bars faults diagnosis through the discrete wavelet” Elektrotechnik und Informationstechnik April , Vol. 135, no. 2, pp 187–194, 2018.

114

A.Ghoggal, A. Hadri Hamida, M. Sahraoui  and S.E.Zouzou,  ‘’Modèle d'analyse de la machine asynchrone saturée au régime transitoire et permanent’’, SGE 2018- "3ème Symposium de génie électrique " - Nancy – France.

115

A. Lakhdari, A. Cheriet, “Gap Estimation of Disbanding Failure Appears in Hybrid Laminate Material by Means of an Eddy Current Evaluation” International conference CISTEM, Oct. 2018, Alger, Algeria

116

A. Lakhdari, A. Cheriet, “Numerical analysis of eddy current distribution in laminated CFRP Materials” The 6th International Conference on Welding, Non Destructive Testing and Materials Industry IC-WNDT-MI, Nov. 2018, Skikda, Algeria.

117

Djalab Aicha, Terki Amel, Zouzou Salah Eddine and Teta Ali , ‘’Study and Analysis of Electrical Faults in PV panels and their impact on production ‘’, 1 st International Conference on Sustainable Renewable Energy Systems and Applications (ICSRESA’19) ; Dec. 04 – Dec. 05, 2019, Tebessa, Algeria.

118

Seddik Tabet, Adel ghoggal, Salah Eddine Zouzou, ‘’ Impact of the Stator Winding Topology on the Fault Harmonic Components in Induction Motors’’,   International Conference on Electrical Engineering and Control Applications,   ICEECA 2019, 17–19 December 2019, Constantine, Algeria

119

Younes Azzoug,    Remus Pusca ,  Mohamed Sahraoui ‘’A Single Observer for Currents Estimation in Sensor’s Fault-Tolerant Control of Induction Motor Drives’’ , The 3rd International Conference on Applied Automation and Industrial Diagnostics , ICAAID, 25-27 September 2019, Elazig, Turkey.

120

Younes AZZOUG, Remus PUSCA, Mohamed SAHRAOUI et Raphael ROMARY “Commande Directe du Couple Tolérante aux Défauts des Capteurs de Courant pour l’Entrainement d’un Moteur à Induction’’, Oléron – 11-14 juin 2019 , jcGe  2019.

121

Khaled Laadjal, Mohamed Sahraoui, ‘’Diagnosis of Electrolytic Capacitors in Three-Phase Interleaved Boost Converters Controlled by Mixed Weighted Sensitivity H∞ Design Control’’IECON 2019.

122

Asma Guedidi, Widad Laala, Abderazak Guettaf and salah eddine Zouzou ‘’  Diagnosis and Classification of broken bars fault using DWT and Artificial Neural Network without slip estimation ‘’, 2020 XI International Conference on Electrical Power Drive Systems (ICEPDS), October 04-07, 2020, Saint-Petersburg, Russia.

123

M.Benakcha, A.Benakcha, S.E.Zouzou, A.Ammar, ‘’Real-time control of PMSM motor drivebased MRAS-STC technique’’, The international congress of advanced technology and engineering, ICOTEN 2021, 2021.

124

M.Benakcha, A.Benakcha, A.Ammar, S.E.Zouzou‘’Real-time control of PMSM motor drive based MRAS-STC technique’’, IEEE International Multi-Conference on Systems, Signals and Devices, SSD 2022.